Description
Buy Starline Brass 300 AAC Blackout
Product Overview
Buy Starline Brass 300 AAC Blackout. Starline Brass prides itself on producing the highest quality brass case available. Their brass is comprised of 70% copper and 30% zinc and is vertically drawn during the manufacturing process which results in more uniform wall thickness. Cases are annealed between each draw to ensure consistent metallurgy in all lots. Each brass case is hand inspected to guarantee the highest quality possible.
Starline Brass is located in Sedalia, MO and has been in business for over 30 years. Trust Starline for your next reloads, you won’t be disappointed. New, unprimed brass. This is not loaded ammunition. Bulk brass should be full-length sized, trimmed and chamfered before loading.
Brass Preparation: With bulk rifle brass you may sometimes notice a few case mouths are “out of round” or slightly dented below the shoulder. These imperfections occur in the final tumbling wash operation after the case mouth has been annealed. Buy Starline Brass 300 AAC Blackout. Brass manufacturers are aware of the case cosmetics and have worked to mitigate it, but due to equipment design, denting may still occur. Minor dents are normally removed in the first firing and will not affect case life or performance. On non-plated brass, you may also notice all the anneal stain might not be polished off, which may give the case neck a pinkish color. With some smaller caliber cases you may notice the case mouths to be slightly belled.
With all new rifle brass, you should first straighten out the case and case mouth, then chamfer and debur the case mouth inside and out. To straighten the case mouth, run the case part way into the sizer die and let the expander ball straighten the brass. To prevent the case neck from stretching, be sure to lubricate the case neck inside the case mouth.
If you are using Nickel plated brass, special care must be taken to lubricate the cases prior to sizing them. Nickel plating is harder than brass and the cases require more effort in sizing. In the event a case becomes stuck, purchase a stuck case remover; don’t use pliers, screwdrivers or other common household tools which could damage your sizing die. Buy Starline Brass 300 AAC Blackout
Made In United States of America
WARNING: This product can expose you to Lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to – www.P65Warnings.ca.gov.Specifications
Product Information
| Cartridge | 300 AAC Blackout (7.62x35mm) |
| Finish | Nickel Plated |
| Condition | New |
| Quantity | 100 Piece |
| Primed | No |
| Primer Size | Small Rifle |
| Country of Origin | United States of America |
Delivery Information
| Shipping Weight | 1.640 Pounds |
I was looking for something with blackout and this works for me.
I was looking for something with comprised and this works for me.
The copper detail is a nice touch.
I was looking for something with overview and this works for me.
Been using it for a few days now and I am pleased. The available is what stood out to me. Happy with it so far.
Got mine recently and have already started using it.
Nice quality for the price. Would buy again.
Arrived in good condition and everything looks fine.
The blackout is what stood out to me. Happy with it so far.
It is okay for the price. Does what it should.